Publications

2023

Rapid acquisition of digital fingerprints of Ti–6Al–4 V macrotexture from machining force measurement data
Thomas Childerhouse, Oliver Levano-Blanch, Xiaohan Zeng, Joshua Taylor, Dennis Premoli, Pete Crawforth, Rachid M'Saoubi, Martin Jackson
Journal of Materials Characterization

Channelling electric current during the field-assisted sintering technique (FAST) to control microstructural evolution in Ti-6Al-4V
James Pepper, Oliver Levano Blanch, Ben Thomas, Martin Jackson  
Journal of Materials Science

Review of Material Modeling and Digitalization in Industry: Barriers and Perspectives
Lucia Scotti, Hector Basoalto, James Moffat, Daniel Cogswell
Integrating Materials and Manufacturing Innovation

A Microstructural Assessment of the Thermal Gradient during Large-scale FAST/SPS Sintering for Tall Samples and Multi-Sample Serial Stacking of Ti-6Al-4V Plates
Samuel Lister, S. J. Graham, James Pepper, Craig Simpson, Nigel Adams, Martin Jackson
Conference: Euro Powder Metallurgy 2023 Congress & Exhibition

A Machinability Assessment of the Novel Application of Field-Assisted Sintering Technology to Diffusion Bond (FAST-DB) and Functionally Grade Dissimilar Nickel-Based Superalloys
Samuel Lister, Oliver Levano Blanch, Daniel Suarez Fernandez, Jacob Pope, Gavin J Baxter, Simon Bray, Martin Jackson
Metallurgical and Materials Transactions A

CIP-FAST: assessing the production of complex geometry titanium components from powders by combining Cold Isostatic Pressing (CIP) and Field Assisted Sintering Technology (FAST)
S. J. Graham, Y. Azakli, J. Withey, and M. Jackson
Powder metallurgy

Insights in α-Al2O3 degradation in multilayer CVD-coated carbide tools when turning IN718
Henry Boyle, Susanne Norgren, Pete Crawforth, Katerina Christofidou, Denis Boing, Martin Jackson
Wear

Effect of processing route on ballistic performance of Ti-6Al-4V armour plate
Beatriz Fernández Silva,Oliver Levano Blanch, Kam Sagoo, Martin Jackson
Materials Science and Technology

Residual Stress Distributions in Dissimilar Titanium Alloy Diffusion Bonds Produced From Powder Using Field-Assisted Sintering Technology (FAST-DB)
Oliver Levano Blanch, Jacob Pope, Ioannis Violatos, Salaheddin Rahimi, Martin Jackson
Metallurgical and Materials Transactions A

CIP-FAST: assessing the production of complex geometry titanium components from powders by combining Cold Isostatic Pressing (CIP) and Field Assisted Sintering Technology (FAST)
S. J. Graham, Y. Azakli, J. Withey &M. Jackson
Powder Metallurgy

AddFAST: A hybrid technique for tailoring microstructures in titanium-titanium composites
C Barrie, B Fernandez Silva, R Snell, I Todd, M Jackson
Journal of Materials Processing Technology, 315, 117920

Solid-state processing of surplus aluminium alloy powders through a combination of field-assisted sintering technology and hot rolling
SJ Graham, A Patel, B Fernandez Silva, W Stott, GJ Baxter, M Roscher, M Jackson
Powder Metallurgy

An experimental and theoretical investigation on Ti-5553/WC-Co (6%) chemical interactions during machining and in diffusion couples
A Graves, A Salmasi, SJ Graham, W Wan, C Xiao, M Jackson, H Larsson, ...
Wear, 204604

2022

Comparison of field-assisted sintering technology (FAST) and hot isostatic pressing (HIP) for the diffusion bonding of dissimilar titanium alloy powders
OL Blanch, BF Silva, S Lister, M Jackson
Conference: World Powder Metallurgy 2022 Congress and Exhibition

A parametric study of the microstructural evolution of an advanced Ni-based superalloy powder when consolidated using Field Assisted Sintering Technology, compared to a hot isostatic pressing benchmark
K Marshall, P Schillinger, NS Weston, M Epler, M Jackson
Advances in Industrial and Manufacturing Engineering 5, 100103

Digital fingerprints of microstructural variation in titanium alloy hip joint forgings via machining force feedback analysis
BF Silva, DS Fernández, I Green, M Jackson
Materials Characterization 192, 112198

Deformation modes investigation during ex-situ dwell fatigue testing in a bimodal near-α titanium alloy
BF Silva, J Kawalko, K Muszka, M Jackson, K Fox, BP Wynne
International Journal of Fatigue 163, 107098

In-Process Fingerprints of Dissimilar Titanium Alloy Diffusion Bonded Layers from Hole Drilling Force Data
A Graves, OL Blanch, DS Fernández, M Jackson
Metals 12 (8), 1353

The influence of machining induced surface integrity and residual stress on the fatigue performance of Ti-6Al-4V following polycrystalline diamond and coated cemented carbide …
T Childerhouse, R M’Saoubi, L Franca, N Weston, P Crawforth, ...
International Journal of Fatigue, 107054

Digital twins for high-value components
S Rahimi, I Violatos, B Wynne, M Jackson
Materials World 30 (6), 38-41

MulTi-FAST: A Machinability Assessment of Functionally Graded Titanium Billets Produced from Multiple Alloy Powders
O Levano Blanch, D Suárez Fernández, A Graves, M Jackson
Materials 15 (9), 3237

2021

On the mechanism of crater wear in a high strength metastable β titanium alloy
A Graves, S Norgren, W Wan, S Singh, M Kritikos, C Xiao, P Crawforth, ...
Wear 484, 203998

Mobilities of Ti and Fe in disordered TiFe-BCC assessed from new experimental data
A Salmasi, SJ Graham, I Galbraith, AD Graves, M Jackson, S Norgren, ...
Calphad 74, 102300

A low-cost machinability approach to accelerate titanium alloy development
C Dredge, R M’Saoubi, B Thomas, O Hatt, M Thomas, M Jackson
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …

Deformation behaviour of a FAST diffusion bond processed from dissimilar titanium alloy powders
O Levano Blanch, D Lunt, GJ Baxter, M Jackson
Metallurgical and Materials Transactions A 52 (7), 3064-3082

The influence of finish machining depth and hot isostatic pressing on defect distribution and fatigue behaviour of selective electron beam melted Ti-6Al-4V
T Childerhouse, E Hernandez-Nava, N Tapoglou, R M’Saoubi, L Franca, ...
International Journal of Fatigue 147, 106169

A novel method for investigating drilling machinability of titanium alloys using velocity force maps
A Graves, S Norgren, P Crawforth, M Jackson
Advances in Industrial and Manufacturing Engineering 2, 100043

Titanium alloy microstructure fingerprint plots from in-process machining
DS Fernández, BP Wynne, P Crawforth, M Jackson
Materials Science and Engineering: A 811, 141074

The effect of forging texture and machining parameters on the fatigue performance of titanium alloy disc components
DS Fernández, BP Wynne, P Crawforth, K Fox, M Jackson
International Journal of Fatigue 142, 105949

2020

Machinability maps–Towards a mechanistic understanding of the machining of TI-6AL-4V and TIMETAL 407
C Dredge, I Berment-Parr, R M’Saoubi, M Jackson
Advances in Industrial and Manufacturing Engineering 1, 100003

Direct electrochemical production of pseudo-binary Ti–Fe alloys from mixtures of synthetic rutile and iron (III) oxide
SJ Graham, LL Benson, M Jackson
Journal of Materials Science 55 (33), 15988-16001

Using machining force feedback to quantify grain size in beta titanium
DS Fernández, M Jackson, P Crawforth, K Fox, BP Wynne
Materialia 13, 100856

Recycling of Titanium Alloy Powders and Swarf through Continuous Extrusion (ConformTM) into Affordable Wire for Additive Manufacturing
SA Smythe, BM Thomas, M Jackson
Metals 10 (6), 843

FAST-forge of Titanium Alloy Swarf: A Solid-State Closed-Loop Recycling Approach for Aerospace Machining Waste
NS Weston, M Jackson
Metals 10 (2), 296

Exploitation of field assisted sintering technology (FAST) for titanium alloys
NS Weston, B Thomas, M Jackson
MATEC Web of Conferences 321, 02006

The effect of Titanium Alloy Composition and Tool Coating on Drilling Machinability
A Graves, M Teike, S Norgren, P Crawforth, M Jackson
MATEC Web of Conferences 321, 13002

FAST-forge of novel Ti-6Al-4V/Ti-6Al-2Sn-4Zr-2Mo bonded, near net shape forgings from surplus AM powder
O Levano, N Weston, J Pope, A Tudball, D Lunn, G Baxter, M Jackson
MATEC Web of Conferences 321, 03010

Recycling of titanium alloy swarf directly into wire using the ConformTM continuous extrusion process
SA Smythe, B Thomas, D Suarez-Fernandez, X Fang, B Marguet, ...
MATEC Web of Conferences 321, 03028

Synthetic rutile derived titanium alloy development utilising the Metalysis Process and field assisted sintering technology
SJ Graham, LL Benson, M Jackson
MATEC Web of Conferences 321, 07001

PRELIMINARY INVESTIGATION OF BILLET PROCESSING ROUTE ON MICROSTRUCTURE, TEXTURE AND FATIGUE RESPONSE OF Ti834 FORGED DISC PRODUCTS
B Fernandez-Silva, BP Wynne, M Jackson, M Bodie, K Fox
MATEC Web of Conferences 321, 11031

A novel technique to assess the effect of machining and subsurface microstructure on the fatigue performance of Ti-6Al-2Sn-4Zr-6Mo
D Suárez-Fernández, BP Wynne, P Crawforth, K Fox, M Jackson
MATEC Web of Conferences 321, 04012

A Method for the Production of Titanium-Tantalum Binary Alloys Using the Metalysis-FFC Process
RJ Howell, LAB Marshall, M Jackson, BP Wynne
MATEC Web of Conferences 321, 07012

Surface and sub-surface integrity of Ti-6Al-4V components produced by selective electron beam melting with post-build finish machining
T Childerhouse, E Hernandez-Nava, R M’Saoubi, N Tapoglou, M Jackson
Procedia CIRP 87, 309-314

Surface roughness response to drilling of Ti-5Al-5Mo-5V-3Cr using Ti-Al-N PVD coated and uncoated WC/Co tools
A Graves, S Norgren, P Crawforth, M Jackson
Procedia CIRP 87, 170-175

2018

The effect of titanium alloy chemistry on machining induced tool crater wear characteristics
O Hatt, Z Lomas, M Thomas, M Jackson
Wear 408, 200-207

Thermomechanical processing of a high strength metastable beta titanium alloy powder, consolidated using the low-cost FAST-forge process
E Calvert, B Wynne, N Weston, A Tudball, M Jackson
Journal of Materials Processing Technology 254, 158-170

2017

On a testing methodology for the mechanical property assessment of a new low-cost titanium alloy derived from synthetic rutile
LL Benson, LA Benson Marshall, NS Weston, I Mellor, M Jackson
Metallurgical and Materials Transactions A 48 (11), 5228-5232

Measurements of residual stress and microstructural evolution in electron beam welded Ti-6Al-4V using multiple techniques
W Rae, Z Lomas, M Jackson, S Rahimi
Materials Characterization 132, 10-19

Continuous extrusion of a commercially pure titanium powder via the Conform process
BM Thomas, F Derguti, M Jackson
Materials Science and Technology 33 (7), 899-903

FAST-forge− a new cost-effective hybrid processing route for consolidating titanium powder into near net shape forged components
NS Weston, M Jackson
Journal of Materials Processing Technology 243, 335-346

On the mechanism of tool crater wear during titanium alloy machining
O Hatt, P Crawforth, M Jackson
Wear 374, 15-20

2016

The Effect of Finish Milling on the Surface Integrity and Subsurface Microstructure in Ti-5Al-5Mo-5V-3Cr
A Cox, JP Villain-Chastre, S Turner, M Jackson
Proceedings of the 13th World Conference on Titanium, 299–304

Solid State Extraction and Consolidation of Titanium Alloys Direct from Synthetic Rutile
L Benson, I Mellor, M Jackson
Proceedings of the 13th World Conference on Titanium, 71–76

Exploitation of Field-Assisted Sintering Technology (FAST) to Produce Pre-Forged Billets from Metastable Beta Titanium Alloy Powder
E Calvert, BP Wynne, M Jackson
Key Engineering Materials 716, 800-816

Predicting chemical wear in machining titanium alloys via a novel low cost diffusion couple method
O Hatt, H Larsson, F Giuliani, P Crawforth, B Wynne, M Jackson
Procedia Cirp 45, 219-222

The Determination of Residual Stress in Extruded Ti-6Al-4V by Contour Method and Finite Element Analysis
J Pollard, S Rahimi, A Watford, M Jackson, B Wynne
Proceedings of the 13th World Conference on Titanium, 305–310

Exploitation of Spark Plasma Sintering and One-Step Forging for Cost-Effective Processing of Titanium Alloy Powders
N Weston, F Derguti, M Jackson
Proceedings of the 13th World Conference on Titanium, 123–128

Crack Initiation and Propagation in Ti‐6Al‐4V Alpha‐Case
G Richards, B Wynne, M Dixon, M Jackson
Proceedings of the 13th World Conference on Titanium, 1515-1520

Continuous Extrusion of Titanium Particulates
B Thomas, F Derguti, M Jackson
Proceedings of the 13th World Conference on Titanium, 107-115

Influence of Aluminium Content on the Machinability and Subsurface Deformation Of Titanium Alloys
L Marshall, B Wynne, S Turner, M Jackson
Proceedings of the 13th World Conference on Titanium, 923-928

Titanium Research Developments in the United Kingdom
M Jackson, M Thomas
Proceedings of the 13th World Conference on Titanium, 1-12

Linking Machining Response of Titanium Billet to Upstream Thermomechanical Processing
P Crawforth, M Jackson, S Turner, BP Wynne
Proceedings of the 13th World Conference on Titanium, 1649-1654

Direct reduction of synthetic rutile using the FFC process to produce low-cost novel titanium alloys
LL Benson, I Mellor, M Jackson
Journal of Materials Science 51 (9), 4250–4261

2015

Spark plasma sintering of commercial and development titanium alloy powders
NS Weston, F Derguti, A Tudball, M Jackson
Journal of Materials Science 50 (14), 4860-4878

Determining a flow stress model for high temperature deformation of Ti-6Al-4V
E Calvert, J Pollard, M Jackson, B Wynne, R Thackray
Materials Science Forum 828, 441-446

The modelling of ring tests at elevated temperatures for the determination of friction in Ti-6A1-4V forgings
JD Pollard, A Watford, M Jackson, BP Wynne
Computer Methods in Materials Science 15 (1), 150--155

Automotive Applications for Titanium
M Jackson
Encyclopedia of Automotive Engineering, 3125-3140